The Different Phases of After Post Construction Cleaning

Even after completing the construction phase of a fresh new building project, there is plenty to be done before the final handover. The construction contractor must ensure that all aspects of safety and client requirements have been properly fulfilled. One of the key aspects of handing over a building or a new home is the process of post-construction cleaning.

After the exhaustive efforts of the builders who worked tirelessly on the building, a lot of dust and debris is left behind in the aftermath. This must be adequately cleaned and disposed of by an after-post-construction cleaning in Pakenham. This process of cleaning is carried out in three phases which will be discussed further in this blog.

What is Post Construction Clean Up?

The name of this service itself implies that the cleaning is done after all aspects of the construction have been completed. The construction contractor may ask his team to do a preliminary removal of all the solid debris, but even then the property requires more elaborate cleaning. Minuscule debris and dust can still have a hazardous effect on the environment and on those who are moving in.

Unlike deep cleaning, post-construction cleaning is a far more specialized form of procedure that is carried out in a remodeled space. The degree of cleaning however may vary depending on the location, condition, and accessibility of the property in question.

The Three Phases of Post-Construction Cleaning

Post-construction cleans are usually done in three phases to systematize the cleaning process more accurately. There are various safety concerns for the team and for the property itself, hence why the probability of any mishaps must be reduced.

Rough Clean

This phase of cleaning is executed just before the completion of the construction. However, not all construction sites necessitate the same degree of rough cleaning as the construction plans may vary. In some cases, the cleaning team removes any trash and hazardous material left behind at the site. If a single section has been completed first, its floors are scrubbed spotless so that no further obstruction is allowed to restrict movement.

Interior Clean

The second phase of the cleaning process takes place immediately after the construction has been completed. This phase is executed more thoroughly than the prior phase. This is when the entire interior of the property is cleaned including all the cabinetry, fixtures, countertops, and appliances. All traces of dust, smudge, and marks are cleared by vacuuming, wiping, sweeping, waxing, and dusting.

Exterior Clean

This usually applies in the case of buildings which has undergone a complete renovation. Therefore, the exterior of the building needs to be thoroughly cleaned to improve the property's curb appeal and value. During this phase, the windows, doors, and outer landscape are prioritized above all else.

Conclusion

It is not necessary to include all three of the above-mentioned phases in the after-builders cleaning service in Melbourne. The true value of this service is distinguished by the quality and not the quantity of cleaning done.